User Manual

Chapter 4: Handling Events
76 Series 6.0 Software (0510-1079-B) - User Guide
Devices Displayed on the Map
Devices are displayed on the map or floor plan on the Client computer(s). The display is configured to assist
the staff in monitoring devices. The location of a device issuing an alarm is indicated by a flashing icon on the
map.
FIGURE 4.1: Main Window
If a transmitter location changes, for example if an alarm is activated while the transmitter is in motion, the
Router closest to the transmitter triggers the alarm. The icon representing the Router flashes on the Client
computer map. Below is a table of how devices are displayed on the map in the Main Window
.
Normal Mode Alarming Device Fault
Green Flashing Red Flashing Yellow
Alarm Message Box
Flashing icon indicates the location
You are h ere
Device assigned to a room is in alarm
(location of client computer)
of the device reporting the event