User Manual

Series 6.0 Software (0510-1079-B) - User Guide 59
Common Operations
Enter Transmitter Information
The Transmitter information tab is only accessible from the Patient Admit Information window. The
Transmitter tab allows you to enter Pendant, Fall Monitoring and Incontinence transmitter information of the
patient being admitted.
To enter transmitter information of the patient being admitted:
1. Click Transmitters on the toolbar.
2. Select the patient’s transmitter number in the Enter TX ID: field.
3. Click Add.
4. From the Transmitter Assigned field, select the transmitter type.
5. For a QR transmitter the Supervised option is selected by default. If desired, deselect it.
6. For an ICM transceiver the Supervised time defaults to the unit’s Transmitter Supervise Time,
set during configuration. However, you can select a different time from the drop-down list.
7. If you want to enable the Inactivity Check-In feature for the transmitters, select the check box.
8. Enter the Begin and the End times for the Inactivity Check-In.
9. Click Save.
NOTE: Information entered can only contain alphabetic and numeric characters, spaces,
and the following special characters: ! - _ , . ; [ ]{ }( )