User Manual

Chapter 3: Using the Software
50 Series 6.0 Software (0510-1079-B) - User Guide
3. For patient transmitters, do one of the following steps:
a. If the Auto-enroll feature is activated and the alarming band transmitter is automatically
enrolled, use the arrow buttons to find and select the transmitter number to be assigned to the
patient. Auto-enrolled alarming band transmitters appear first in the list. Click Update to bring
up the Admit Information window and enter admit information; the yellow fields designate
required entry (see “Patient Admit Information Window” on page 54).
b. If the alarming band transmitter was not auto-enrolled, click Manual Admit to bring up the
Admit Information window and enter admit information; the yellow fields designate required
entry. (see “Patient Admit Information Window” on page 54).
4. For asset transmitters, do one of the following steps:
a. If the transmitter has been auto-enrolled in the system, use the arrow buttons to find and select
the transmitter number to be assigned to the asset. Click Update Asset to bring up the Admit
Information window and enter admit information; the yellow fields designate required entry
(see “Asset Admit Information Window” on page 55).
b. If the transmitter was not enrolled, click Add Asset to bring up the Admit Information
window and enter admit information; the yellow fields designate required entry (see “Asset
Admit Information Window” on page 55).
5. Once admit information has been entered, click Save.
If the admit is successful, you will get the following dialog box:
6. Click OK.
NOTE: The Manual Admit and Add Asset options can be disabled to require Auto-
enroll admits only. This features is enabled/disabled in Client Properties. Refer to the
Series 6.0 Software Administrator Guide.