User Manual

Series 6.0 Software (0510-1079-A) - User Guide 19
Code Alert ICM System
Quick Look Router
A Quick Look Router is an ICM Router connected to a wireless Quick Look Display or High Visibility
Display. When an alarm is sent from the Server to the Router, the wireless display shows the type of alarm,
location data and transceiver number. As new alarms occur, they appear immediately; the display then begins
scrolling through each active alarm.
The Quick Look Router also acts as an integral part of the back-up reflector. This reflector functionally
allows the ICM network to take over the responsibility of distributing alarm information (transceiver number
only) to the Quick Look Routers in the event of an inoperable Server.
Quick Look Routers are supervised; a routine signal is sent from each Quick Look Router and if the signal is
not received by the system, a Device Fault event is generated in the Event List at the computer.
NOTE: Please reference to a printed copy of the Transmitter Report and Device
Report to correlate the transceiver number to the patient or the device. It is recommended
to reprint the Transmitter Report after patients are admitted and discharged.
WARNING: Quick Look Routers should not be added to multiple units. Since
Routers are used to determine location, inaccurate location data could result.
1-41
1-42