User Manual

Series 6.0 Software (0510-1079-A) - User Guide 7
9450 System
9450 System
There are many transmitters and devices that can be used with the software. The transmitters and devices in
this section are supported by the 9450 System running the Series 6.0 Software application.
The 9450 System consist of the following equipment.
• Central Server and Client Computer(s)
• Quick Look Display(s)
• Exit Alarm Controller
• Exit Alarm Receiver
• Magnetic Reed Switch
• CodeLock Electromagnetic Lock
• Alarming Band Receivers
• Quick Look Display
• Transmitters
• Alarming Band
• Wander Management
• Mother
Exit Alarm Controller
The Exit Alarm Controller receives data from the Exit Alarm Receivers and issues an alarm if a transmitter is
detected in the Exit Alarm Zone, and the door is open. The Exit Alarm Controller contains a keypad, and/or
card reader access device, that allows authorized staff to reset the system after an alarm. The Exit Alarm
Controller is the device that triggers the alarm process for the Central Server and Staff Alert. For more
information about the Exit Alarm Controller, see the Delayed Egress Exit Alarm Controller Installation
Guide.
Power: The red light indicates that
power is available to the system.
Signal: The yellow light indicates
that a signal has been received
from the Exit Alarm Receivers.
Status: The green light indicates
that the system is in bypass or that
the unit is disarmed.
1-03