User's Manual

CHAPTER 2 Installing Transceiver Devices
Page 48 of 64 Quick Response Premiere Wireless Call System Hardware Installation Guide
0510-1099-E
Reset the Pendant
Reset the Pendant by pressing the button six times with less than 1 second between presses. The green
light will flash each time the button is pressed.
If the alarm clear message has been delivered successfully, the green light will flash 3 times. The green
light will no longer blink once every 3 seconds.
Verify the Pendant Appears in the System
The pendant is now ready to be assigned. Verify the Pendant appears in the Select Transmitter pull-
down in the patient’s Admit Information window, Transmitter tab.
To verify Pendant transceiver appears in the system
1. Select Login (or Functions if password protection is disabled).
2. Enter your Login and Password or use your identification card.
3. Click Manual Admit.
4. Select the Transmitters tab.
5. Verify that the Pendant ID number (last four numbers printed on the Pendant) appears in the Select
Transmitter pull-down.