User's Manual

CHAPTER 2 Installing Transceiver Devices
Quick Response Premiere Wireless Call System Hardware Installation Guide Page 39 of 64
0510-1099-E
Replacing the Call Station Batteries
The QR Premiere Call Stations are powered by 4 replaceable AA batteries.
To replace the AA Batteries for the Call Stations
1. Remove the Nurse Call transceiver from its mounted location by first removing the screw on the
bottom of the enclosure.
2. Rotate the enclosure upward and remove from wall. The four AA batteries will be visible. There is
no need to disassemble anything as the batteries are removable as they are. Pull all four batteries
free from the battery holder.
NOTE: Do not use a metal screwdriver or metallic instrument to remove the battery. This may
damage the device.
3. Insert four new AA Lithium Ion batteries into the battery holder. Make sure to pay attention to the
polarity of the batteries within their holder.
4. Verify communication is resumed by alarming the Nurse Call transceiver and observing the LED
through the front of the Nurse Call transceiver. It should be blinking red.
5. Once communication is verified replace the front cover of the Nurse Call transceiver and remount it
to the wall mounting plate.