User's Manual

CHAPTER 1 Installing Hardware Components
Page 32 of 64 Quick Response Premiere Wireless Call System Hardware Installation Guide
0510-1099-E
Scan Devices
The Server Management window allows you to Scan devices.
1. Select Login (or Functions if password protection is disabled).
2. Enter your Login and Password or use your identification card.
3. Press Enter or click OK.
4. Select Administrative Functions.
5. Select Configuration.
The System Management Home page opens.
6. Select Server Management.
The Configuration Server Management home page opens.
FIGURE 1.6: Configuration Server Management Home Page
7. Next to the Scan Devices button, select the ComPort assigned to the Gateway/Router from
the ComPort pull-down.
8. Click Scan Devices, a Scan Status window opens verifying the successful completion of
the scan.
9. Click Close to close the Scan Status window and return to the Server Management home
page.
10. Open the Dashboard and verify the Gateway and each of the Routers are communicating.
11. Install the next Gateway and Routers.