User's Manual

CHAPTER 1 Installing Hardware Components
Quick Response Premiere Wireless Call System Hardware Installation Guide Page 23 of 64
0510-1099-E
Configuring the 32 Channel Controller
Configure Units
When each device installed in your facility has been added to the software database, units must
be defined and added. A Unit represents a protected area in your facility that will be monitored
as a unit. All devices associated with a 32 Channel Controller must be in the same unit. Refer to
the applicable Series Software Administrator Guide.
Configure 32 Channel Controller
All devices recognized by the system are listed in the Configuration Device window. Once the
32 Channel Controller has been installed and properly wired, the affiliated Router must be
configured in the system.
To configure the 32 Channel Controller
1. Go to the Configuration home page.
2. Select Devices.
The Configuration Devices window opens.
3. Click the Properties box next to the device you wish to update. In this example the 32
Channel Controller type is displayed as: QLRELAY.