User Manual
Table Of Contents
- Important Warnings
- Bio-Incompatibility Notice
- Compliance
- Introduction
- About this Guide
- Additional Detailed Documentation
- Contact Information
- Product Warranty
- Chapter 1
- Introduction
- Installation Checklist
- Installing Components
- Install the Central Server
- Install the Gateway
- Install Routers
- Place a Pendant into Survey Mode
- Determine Placement of Routers
- Quick Look Router
- Gateway/Router Reset Button
- LED Sequence
- Gateway/Router Channel Default
- Additional Gateway/Router Installation
- Changing Channels
- Router Depth
- Rebuild Subnet on Scanned Devices
- Scan Devices
- Chapter 2
- Introduction
- Transceiver Devices
- LED Light Indicator
- Installing Transceiver Devices
- Pull Cords/Emergency Call
- Check-in Pull Cord
- Pull Cord Transceiver with Extended Battery Pack
- Wall Mount Emergency Call
- Universal Transceiver
- Tamper
- Nurse Call
- Door/Window Transceiver
- Door/Window Transceiver with Reset Button
- PIR Sensor
- Smoke Detector
- Pendant Transceivers
- Activate the Battery
- Set up the Pendant
- Reset the Pendant
- Verify the Pendant Appears in the System
- Replace the Battery
- Test the System Operation
- Chapter 3
- Introduction
- Device Failure
- Router Failure
- Gateway Failure
- Chapter 4
- Specifications
- Power Cable Run Lengths
- Mesh Network Router/Gateway
- Quick Look Display for Quick Look Router
- Pendant Transceiver
- Pull Cord
- Nurse Call
- Door/Window Transceiver
- PIR Sensor
- Smoke Detector
- Universal Transceiver
Chapter 4: Specifications
50 9600 Series Wireless Call System (0510-1078-D) - Hardware Installation Guide
Mesh Network Router/Gateway
Quick Look Display for Quick Look Router
Router/Gateway Specifications
Power 9-15 VDC, .2 A UL Listed
Battery Backup 3.7 V, Lithium Ion Rechargeable Battery, 940 mAH Battery Backup
(10 - 12 hours)
Frequency 2.4 GHz Direct Sequence Spread Spectrum
Frequency Range 2.405 - 2.480 GHz
Bandwidth 5 MHz/Channel
Transmit Power +14 dBm
Operating Temperature 0° F - 100° F
Receive Sensitivity Received Signal, Minimum -72dBm
SNR, Minimum 9dB
Dimensions 4.5" H x 2.7" W x .56" D
Weight 2.9 oz. (82.21g)
Color Off White
Certification FCC, Part 15
Zigbee 802.15.4 Compliant
Quick Look Display Specifications
Size 3.6 x 11.0 x 1.8 inches (View dimensions of display)
Weight 1.7 ounces
Color Light Gray Enclosure
Vol ta ge 12V DC
Display Vacuum Fluorescent (Aqua), 2 lines, 20 Characters per line
Tilt Adjustment Reclines maximum 90 degrees
Current Consumption Specification 400mA
Swivel 330 degree rotation
Included Accessories 4" wall-mount bracket
Certification FCC, Part 15
Zigbee 802.15.4 Compliant