User Manual

9600 Wireless Call System (0510-1078-D) - Hardware Installation Guide 1
Preface
Introduction
This guide provides detailed information about the hardware components and devices of the ICM System. It
provides instructions about installation as well as specific requirements for mounting components that make
up the system.
The Code Alert 9600 Wireless Call System immediately notifies staff when a resident requires attention, and
provides details that are essential in responding quickly and competently to a resident’s needs. The Code
Alert 9600 Wireless Call System offers a variety of devices, each of which interfaces with the Central Server
to ensure that when a resident is in need, staff is alerted.
A Code Alert 9600 Series device may be worn by a resident; it could be mounted to a wall where it is easy to
access; it may be integrated with a wireless smoke detector; it could even be used in conjunction with other
systems such as the Code Alert Wanderer Monitoring System (exit controllers and electromagnetic door
locks).
Devices send data to the Central Server on a regular basis. When an event occurs that warrants a response,
staff is alerted by an audible alarm from the Central Server, a message is displayed on-screen, and the
designated staff is summoned to respond to the situation. Staff can also be notified of an event via pager or
phone.
About this Guide
This Guide is intended for users who install components of the 9600 Wireless Call System, in conjunction
with the Series 6.0 or greater Software. It includes detailed information about the hardware installation and
setup of various components that interface with the Series 6.0 Software.
WARNI NG: Before you begin any new upgrades, repairs or maintenance, RF
Technologies recommend that you backup the MSSQL and .DB Flat File
databases on a removable media, such as a external drive, to be copied to a new or
different computer if necessary. Refer to the Database Archive and Backup
Service Guide (0510-0306).