User's Manual
Table Of Contents
- Compliance
- Federal Communication Commission (FCC) Compliance
- FCC and IC Radiation Exposure Statement for Portable Devices
- Important Warnings
- Introduction
- Help Alert E-Call Solution
- Intended Audience
- Additional Detailed Documentation
- Contact Information
- Product Warranty
- Chapter 1
- Introduction
- The Staff Duress Pendant
- Wearing the Pendant
- To Call for Assistance
- LED Light Behavior
- Chapter 2
- Replacing the Pendant Battery
- Cleaning & Caring for the Pendant
- Chapter 3
- Specifications
- Environmental Specifications
- Radio Specifications
Chapter 1: Using and Staff Duress Pendant
4 Staff Duress Pendant (0510-0332-A) - User Guide
To Call for Assistance
Firmly press and hold the red button on the Pendant (for at least one second). A red light
illuminates while the button is depressed. When the light goes out, release the button. The
light blinks green briefly to indicate successful communication, then flashes red in 10-
second intervals to indicate that the Pendant is in an alarm state and transmitting data
packets.
When the alarm is acknowledged at the monitoring station, the light now flashes green in
10-second intervals to indicate that the alarm is now in an acknowledged state. Clearing the
alarm at the monitoring station automatically resets the Pendant for the next distress call.