User Manual
Table Of Contents
- In-Service Guide
- Compliance
- Federal Communication Commission (FCC) Compliance
- Industry Canada Compliance
- Important Warnings
- Overview
- About this Guide
- Additional Detailed Documentation
- Contact Information
- Product Warranty
- Chapter 1
- Main Menu
- Alarms Menu
- Silence Alarms
- No Signal (option not shown)
- Help Call/Clear
- Charging the Care Manager
- Chapter 2
- Chapter 3
- Specifications
Important Warnings
It is important for your facility to implement and enforce the following WARNINGS in order to keep
all equipment functioning properly. Disregarding the information and instructions in this document is
considered abnormal use and may result in injury or system failure.
WARNING
ACCESSORIES (SUPPLIES)—To ensure patient safety and proper operation
of equipment, use only parts and accessories manufactured or recommended
by RF Technologies, Inc. Parts and accessories not manufactured or
recommended by RF Technologies, Inc. may not meet the requirements of the
applicable safety and performance standards.
Failure to use the components and supplies specified by RF Technologies, Inc.
may result in equipment and/or system failure.
WARNING
EXPLOSION HAZARD—This device should not be used in the presence of
flammable gas mixtures. It should also not be used in oxygen enriched atmospheres.
WARNING
HIGH RISK FOR FALL—The CA520 System may not be suitable for patients who
are at “HIGH RISK FOR FALL.” Other monitoring measures may also be required.
The Motion Alert System should not be a substitute for routine visual monitoring
protocol by caregiving personnel.
WARNING
INSTALLATION AND CONFIGURATION—It is the responsibility of the
facility to follow the installation instructions carefully, as outlined in the Series 6.0
Software Administrator Guide, and to use the components and supplies specified by
RF Technologies, Inc. for all installations.
Failure to use the components and supplies specified by RF Technologies,
Inc. may result in equipment and/or system failure.
WARNING
INSTRUCTIONS FOR SET UP AND USE—It is the responsibility of the facility to
follow the instructions for set up and use carefully, as outlined in this manual, and to
use the components and supplies specified by RF Technologies, Inc. for set up and
use. Do not attempt to use extension cords or other equipment not supplied by RF
Technologies, Inc.
Failure to use the components and supplies specified by RF Technologies, Inc.
may result in equipment and/or system failure.