User's Manual

WARNING
PATIENT GENERATED ALARMS—Do not rely exclusively on patient
generated alarms for patient care and safety. The alarm function of
equipment in the possession of patients must be verified periodically and
regular patient surveillance is recommended.
WARNING
PATIENT MONITORING—The most reliable method of patient
monitoring combines close personal surveillance with correct operation of
monitoring equipment. It is the responsibility of the facility to periodically
check on patients in possession of RF Technologies, Inc.'s equipment (i.e.
Pendants, Pull Cords, Control Units) to mitigate risk of inappropriate use of
equipment or strangulation and stumbling hazards from cables and cords.
WARNING
PRODUCT WARRANTIES—Failure to follow the Warnings and Cautions
in this guide voids any and all Product Warranties.
WARNING
STATIC DISCHARGE—Do not touch the conductor portion of any
conductor or port. Damage to the device may result.
WARNING
STRANGULATIONS AND TRIPPING HAZARD—Due to the possibility
of strangulation, all cables and cords should be routed away from the
patient’s throat. Cables and cords must be routed in a way to prevent
tripping hazards.
WARNING
SYSTEM INSPECTION—It is the responsibility of the facility to establish
and facilitate a regular inspection schedule for your system. RF
Technologies, Inc. recommends quarterly inspections of your system for
safety and performance by a qualified RF Technologies, Inc. representative.
To arrange for a quarterly inspection by RF Technologies, Inc., call our
Technical Support Department at (800)-669-9946 or [phone].
Failure to provide regular inspection of these products may result in
equipment and/or system failure.