User's Manual

Chapter 2 Transmitter Clearing Device
Baby Check Transmitter User Guide Page 15 of 22
0510-1124-A
b. Press and hold the button on the left side of the transmitter tester.
Press and hold the button
Indicator Light
c. The device beeps once when you press the button.
d. If the Transmitter Clearing Device is working properly, the
indicator light flashes and a tone sounds once per second. Wait for
at least 3 flashes of the indicator light and 3 tones from the
Transmitter Clearing Device tester to verify that the Transmitter
Clearing Devices is functioning correctly.
e. If the Transmitter Clearing Devices fails this test, check the battery
in the tester. The transmitter tester requires a 9V battery.
f. Retest the Transmitter Clearing Devices If it fails a second time,
DO NOT USE THE TRANSMITTER CLEARING DEVICE and
contact RF Technologies Technical Support Team at (800)669-
9946 or [phone].