User's Manual

Chapter 1 Transmitters
Baby Check Transmitter User Guide Page 9 of 22
0510-1124-A
The Baby Check Transmitter
The Baby Check transmitter is lightweight and compact.
Each transmitter is stamped with a warranty expiration
date. This date indicates the date that RF Technologies’
warranty on that transmitter expires (the last day of the
month stamped). If the warranty period has expired,
discard the Baby Check transmitter immediately.
WARNING: Using a Baby Check transmitter beyond the printed
expiration date can result in system failure and/or a mismatch or
abduction.
Required Transmitter Testing
You must test the Baby Check transmitters top verify their functionality.
To do this, perform a match using the Baby Check transmitter and a
working Infant transmitter.
NOTE: The Baby Check transmitter cannot be tested with the transmitter
tester used with the infant transmitter.
WARNING: You must test all transmitters prior to use to
verify proper operation. Failure to test the transmitters before
use can result in system failure and/or a mismatch or
abduction. In addition, failure to test transmitters voids the
RF Technologies Product Warranty.
WARNING: The Baby Check transmitter does not link to an
Infant transmitter when the Baby Check transmitter’s battery
is low. If this occurs, discard the Baby Check transmitter and
replace it with a new one.
To order additional Baby Check transmitters, contact RF Technologies
[phone] or [phone]