User's Manual

Chapter 1 Transmitters
Baby Check Transmitter User Guide Page 7 of 22
0510-1124-A
Link a Baby Check Transmitter
This section provides detailed information on how to Link a Baby Check
transmitter to an Infant transmitter.
To Link a Baby Check transmitter
When ready to Link the Baby Check transmitter with the Infant 1.
transmitter bring the Baby Check transmitter 10-12 inches from the
Infant transmitter and press the button on the front of the Baby
Check transmitter.
a. The amber LED on the front of the Baby Check transmitter will
begin flashing as it attempts to link to the Infant transmitter. It
will attempt to Link for two minutes.
b. Once the Baby Check transmitter Links with the Infant
transmitter the Green LED on the front of the Baby Check
transmitter will flash three times.
c. The amber LED on the front of the Baby Check transmitter will
begin flashing again as it attempts to look for a second Infant
transmitter (a twin).
 If a twin exists bring the Baby Check transmitter 10-12
inches from the second Infant transmitter. Again, once the
Baby Check transmitter Links with the Infant transmitter the
Green LED on the front of the Baby Check transmitter will
flash three times.
 If a twin does not exists press the button on the front of the
Baby Check transmitter and it will stop attempting to link.
 Repeat the previous steps if a triplet exists.
Return the Baby Check transmitter to its holder outside the mother 2.
and infant’s room.