User's Manual

Chapter 1 Transmitters
Page 6 of 22 Baby Check Transmitter User Guide
0510-1124-A
Mounting of Baby Check Transmitter Wall Bracket
The Baby Check transmitter resides outside the Mother’s room near the
doorway.
To mount the Baby Check transmitter
Determine a desired location near the doorway. The mounting height 1.
should be between 36 and 42 inches from the floor.
Once the location is determined place the mounting bracket on the 2.
wall and mark the four mounting holes found in the four corners of
the mounting bracket.
Center punch each hole and install nylon wall anchors in each hole. 3.
If the mounting bracket is to be attached to a concrete or masonry
wall use the wall anchors designed for these substrates.
Attach the mounting bracket to the wall with the four screws 4.
provided.