User Manual

Nurse Call
CA630 System (0510-1116-A) - In-Service Manual 10
Nurse Call
When a patient pushes the button on the Nurse Call cord, an Assistance
Required alarm is generated. The control unit beeps twice every 2-seconds
to alert caregivers. A red status indicator light flashes in conjunction with
the beeps for a visual alert.
Proceed to the patient.
Press the Hold button to stop the alarm. After HOLD is pressed, the orange
light flashes to indicate the system has been paused.
Assist the patient.
Reset the Nurse Call button by pressing the small red reset pin located at the
base of the cord set.
The system begins monitoring after the 30-second silence period. Or, press
the Hold button again to begin monitoring immediately.
If the Enforce JOINT COMMISSION feature is activated, you must select an
Event Cause. From the Client computer, click anywhere in the Assistance Re-
quired Alarm Message Box to access the Event Information window and select
an Event Cause.