User Manual

Smart Sense Transmitter (0510-1093-C) - User Guide 1
Preface
Overview
This guide provides important information about the Smart Sense transmitter, a component
of the 9450 System. It provides detailed instructions about using the transmitter as well as
specific requirements.
9450 System
The 9450 System monitors doors, elevators, hallways, and stairwells, to assist staff in
monitoring patients and assets in a facility. The various transmitters and devices of the
system alerts staff if a transmitter’s banding material is tampered with, cut or opened
without authorization (referred to as Cut Band or Band Off for Infant and/or Emergency
Department systems only) or if monitored devices in the system are not functioning
properly. An alarm also sounds if a transmitter breaches an Exit Alarm Zone. Additionally,
if the system fails to detect a transmitter within its monitored area, a No Signal alarm is
issued.
Depending on which equipment options your facility has installed, the 9450 System can
automatically lock doors and deactivate elevators. In addition, the system sounds an alarm
at the Central Server and its network of Client computers when the event occurs. If
configured, alarms are also annunciated at remote notification locations (i.e. pagers, walkie-
talkie, Quick Look Interface).
With the Mother/Infant Matching feature activated, an alarm is generated if there is a
mismatch, meaning the Infant and Mother transmitters do not match; a linking error,
meaning there is a problem linking the Smart Sense transmitter to a Mother transmitter; or if
a discharge is attempted without first matching the Smart Sense transmitter with the Mother
transmitter.