User Manual

Chapter 1: The Smart Sense Transmitter
8 Smart Sense Infant Transmitter (0510-1093-C) - User Guide
Fastening a Smart Sense Transmitter
To fasten a Smart Sense transmitter
1. Remove the Smart Sense banding material, with plastic guide tabs attached, from the
plastic backing.
CAUTION: You must test all transmitters prior to use to verify
proper operation. This includes every time that the band is
replaced. Failure to test the transmitters before use can result in
system failure and/or a mismatch or abduction. In addition,
failure to test transmitters voids the RF Technologies’ Product
Warranty.
WARNING: Only Smart Sense banding material can be used to
fasten Smart Sense transmitters. Use of any other banding material
with the Smart Sense transmitters voids the RF Technologies'
Product Warranty and could result in system failure.