User's Manual

Series 7.0 Software (0510-1086-B) - User Guide 83
Administrative Functions
Staff Drill
When a staff drill is requested, the attendant performing the drill enters the information in the Staff Drill
window.
To access the Staff Drill window
1. Select Login (or Functions if password protection is disabled).
2. Enter your Login and Password or use your identification card.
3. Press Enter or click OK.
4. Select Administrative Functions.
5. Select Staff Drill.
The Staff Drill window opens.
FIGURE 3.17: Staff Drill
6. Enter the Date of the Staff Drill as the two digit month, followed by the two digit day, followed by
the four digit year. Enter the Time as the two digit hour followed by the two digit minute.
7. In the Comments field, enter your comments.
8. Do one of the following:
a. Click Save to save and return to the main window.
b. Click Cancel to return to the main window without saving.