User's Manual

Chapter 3: Using the Software
82 Series 7.0 Software (0510-1086-B) - User Guide
FIGURE 3.16: Admit Information
7. Once admit information has been entered, click Save.
If the admit is successful, you will get the following dialog box:
8. Click OK.
Asset Main Information Tab
The Asset Main information tab allows you to enter identification information about the asset being admitted.
The yellow fields designate required entry.
1. Click Main on the toolbar.
2. In the Model field, type the model or description of the asset being admitted (required).
3. In the Make field, type the manufacturer’s information of the asset being admitted.
4. In the SN field, type the serial number of the asset being admitted.
5. In the Transmitter ID field, type the 3-digit ID number printed on the alarming band transmitter to
be assigned to the asset.
6. In the Unit field, select the unit to which the asset is currently assigned, even if the asset will not
remain in that unit (required).
7. Click the Risk level associated with the asset. Choices are Low or High. If your facility has
enabled the Lockdown on Cut Band Alarms feature, a Cut Band Alarm will trigger a Global
Lockdown when a High Risk level is selected for an asset transmitter.
NOTE: Information entered can only contain alphabetic and numeric characters, spaces,
and the following special characters: ! - _ , . ; [ ]{ }( )