User's Manual

Series 7.0 Software (0510-1086-B) - User Guide 79
Update Record
Update Record
The Update Record function is used to update a patient or asset from one protected area to another protected
area, for example from Labor and Delivery to Post Partum. Use the following steps to transfer a patient.
To update a record
1. Select Login (or Functions if password protection is disabled).
2. Enter your Login and Password or use your identification card.
3. Click Update Record.
The Admit Selections - Update Records window appears. Patients or that currently exist in the
census are listed in the window.
FIGURE 3.13: Upgrade Record
4. Use the arrow buttons to find and select the patient to be updated.
5. Double click on the patient to bring up the Admit Information window and update admit
information; the yellow fields designate required entry.
6. Once information has been updated, click Save.
NOTE: If a transmitter is in alarm, the event must be cleared before the patient or asset
can be placed into Transfer.