User's Manual

Chapter 3: Using the Software
70 Series 7.0 Software (0510-1086-B) - User Guide
Adjust
The Adjust feature is only applicable with alarming band transmitters. In the normal course of a patient’s stay
in your facility, it may become necessary to adjust the banding material so that the alarming band transmitter
fits the patient’s ankle or wrist more comfortably and securely. The Adjust function temporarily suspends the
Cut Band feature for a selected transmitter, allowing the banding material to be adjusted without triggering an
alarm. The time period allowed for the band adjustment is specified by your facility.
To adjust banding material on a Transmitter
1. Select Login (or Functions if password protection is disabled).
2. Enter your Login and Password or use your identification card.
3. Click Adjust.
The Adjust Bands window appears. Patients or assets with alarming band transmitters that
currently exist in the Census are listed in the window.
FIGURE 3.10: Adjust Bands Window
NOTE: If a transmitter is in alarm, the event must be cleared before the Adjust function
can be initiated.