User's Manual

Series 7.0 Software (0510-1086-B) - User Guide 69
Discharge
To cancel a discharge
If the discharge is for an alarming band transmitter, you can cancel the discharge before the discharge time
expires.
1. Select Login (or Functions if password protection is disabled).
2. Enter your Login and Password or use your identification card.
3. Click Discharge.
The Discharge window appears (Figure 3.9 on page 67). Patients, assets or auto-enrolled
transmitters that currently exist in the census are listed in the window.
4. Use the arrow buttons to find and select the patient or asset whose discharge is to be canceled.
Multiple patients or asset can be selected for canceling.
5. Click Cancel.
A dialog box appears indicating that the discharge for the selected patient or asset has been
canceled.
6. Click OK.
Transmitter is no longer communicating with the system
The following dialog box appears when a transmitter is no longer communicating with the system and a
Discharge attempt is made.
1. Follow the steps outline in the dialog box.
2. Click OK.
NOTE: If the unit is configured for immediate discharge, you will be unable to cancel the
discharge.