User's Manual

Chapter 3: Using the Software
64 Series 7.0 Software (0510-1086-B) - User Guide
To save a picture to the P: drive on the Server
1. Insert the removable media (USB drive).
2. On the Computer Desktop, double-click My Computer.
3. Double-click the removable media.
4. Right-click the pictures on the media you want to access and select Copy.
5. Double-click P:.
6. Double-click Pictures.
7. Double-click Patient or Asset.
8. Right-click and select Paste to paste the pictures to the P: drive for access.
Enter Transmitter Information
The Transmitters tab is only accessible from the Patient Admit Information window. The Transmitter tab
allows you to enter Pendant, Fall Monitoring and Incontinence transmitter information of the patient being
admitted.
To enter transmitter information of the patient being admitted:
1. Click the Transmitters tab.
2. Select the patient’s transmitter number in the Transmitter ID: field.
3. Click Add.
4. From the Transmitter Assigned field, select the transmitter type.
5. For a QR transmitter the Supervised option is selected by default. If desired, deselect it.
6. For an 9600 Series transceiver the Supervised time defaults to the unit’s Transmitter Supervise
Time, set during configuration. However, you can select a different time from the drop-down list.
7. If you want to enable the Inactivity Check-In feature for the transmitters, select the check box.
8. Enter the Begin and the End times for the Inactivity Check-In.
9. Click Save.
NOTE: Information entered can only contain alphabetic and numeric characters, spaces,
and the following special characters: ! - _ , . ; [ ]{ }( )