User's Manual

Series 7.0 Software (0510-1086-B) - User Guide 59
Admit Functions
Pre-Enroll
Alarming band transmitters that are not banded but are available for use with a proper transmitter number (a
Transmitter ID within the range set in Configuration), can be pre-enrolled.
To Pre-Enroll a transmitter
1. Select Login (or Functions if password protection is disabled).
2. Enter your Login and Password or use your identification card.
3. Click Pre-Enroll.
4. The Pre-Enroll Information window opens for you to enter admit information; the yellow fields
designate required entry.
FIGURE 3.4: Pre-Enroll Information
5. Once admit information has been entered, click Save.
If the admit is successful, you will get the following dialog box:
6. Click OK.
7. The Pre-Enroll transmitter appears in the Census with a status of Pre-Enroll. The transmitter must
be banded within the time set in Configuration. A white Pre-Enroll Expired alarm message is
generated if the time expires before banding. You must Clear the alarm and Pre-Enroll the
transmitter again, making sure that it is properly banded within the configured time.