User's Manual

Series 7.0 Software (0510-1086-B) - User Guide 55
Admit Functions
Admit Functions
Admit Functions such as Name An Auto-Enrolled Transmitter and Manual Admit are found in the User
Functions menu. To Add/Update An Asset is found in the second tier of the User Functions menu under
Administrative Functions.
Name An Auto-Enrolled Transmitter
Transmitters that are automatically enrolled in the system can be assigned to a patient using this option. When
you click on a window opens with only Auto-Enrolled transmitters.
To admit a patient from Name An Auto-Enrolled Transmitter
1. Select Login (or Functions if password protection is disabled).
2. Enter your Login and Password or use your identification card.
3. Click Name An Auto-Enrolled Transmitter.
The Admit Selection - Auto-Enrolled window appears. Auto-enrolled transmitters that currently
exist in the census are listed in the window.
FIGURE 3.1: Admit Selection –Auto Enrolled
4. Use the arrow buttons to find and select the transmitter number to be assigned.
5. Double click on the Auto-Enrolled transmitter to bring up the Admit Information window and enter
admit information; the yellow fields designate required entry
6. Once admit information has been entered, click Save.
If the admit is successful, you will get the following dialog box:
7. Click OK.