User's Manual

Chapter 2: Software Features
46 Series 7.0 Software (0510-1086-B) - User Guide
Census
Click Census to display a census screen of every Auto-enroll transmitter, patient and asset in the system.
FIGURE 2.9: Census Window
In the top right corner of the Census screen are buttons to allow you to print or scroll through the census.
• Click Print for a print out of the census screen. A printer must be connected to the
computer from which the print command is initiated and set as its default printer.
• Click Next to scroll down through the census.
• Click Previous to scroll back up through the census
The information displayed includes:
Name—the name of the patient, asset or transmitter enrolled in the system.
Room—the room assigned to the patient.
Status—the status (mode of operation) that the transmitter is in (monitor, transfer, escort, adjust, or
discharge).
Last Known Location—the location of the receiver that best picked up the last signal from the transmitter.
Destination—the destination of the patient in escort or transfer.
Time Remaining—the time remaining to complete the escort or transfer.
Transmitter ID—the identification number of the transmitter.
Risk—the risk level assigned to the patient.
Gender—the gender of the patient.
NOTE: The information for State, Last Known Location and Time Remaining only
update every 10 minutes.