User's Manual

Chapter 2: Software Features
44 Series 7.0 Software (0510-1086-B) - User Guide
Functions
The Functions menu provides access to commonly used functions found in the User Functions menu. The
User Functions available will depend on your software licenses. To access User Functions menu, click
Functions.
FIGURE 2.7: User Functions
NAME AN AUTO-ENROLLED TRANSMITTER—Click to access the Admit Auto-Enrolled
window. This window displays a list of only Auto-Enrolled transmitters. See “Name An Auto-Enrolled
Transmitter” on page 55.
MANUAL ADMIT—Click to access the Admit Information window. This is where you enter a new
patient or asset into the system. This selection is also used to update existing patients or assets. See “Manual
Admit” on page 56.
PRE-ENROLL—Click to access the Pre-Enroll Information window. Alarming band transmitters that are
not banded but are available for use with a proper transmitter number (a Transmitter ID within the range set in
Configuration), can be Pre-Enrolled. See “Pre-Enroll” on page 59.
DISCHARGE—Click to access the Discharge window. This allows you to take a patient or asset out of the
census of monitored transmitters. If the patient is wearing an alarming band transmitter, you then have a
limited time to remove the banding material from the transmitter. The discharge time is configured per unit or
can be set to discharge the patient or asset immediately. See “Discharge” on page 67.