User's Manual

Chapter 1: Equipment Overview
6 Series 7.0 Software (0510-1086-B) - User Guide
9450 System
The transmitters and devices in this section are supported by the 9450 System running the Series 7.0 Software
application.
The 9450 System consist of the following equipment.
• Central Server and Client Computer(s)
• Quick Look Display(s)
• Staff Alert Panel
• Exit Alarm Controller
• Exit Alarm Receiver
• Magnetic Reed Switch
• CodeLock Electromagnetic Lock
• Alarming Band Receivers
• Transmitters
• Smart Sense
• Alarming Band
• Mother
• Wander Management
• CodeWatch
Staff Alert Panel
The Staff Alert Panel receives alarm signals from Exit Alarm Controllers and
Alarming Band Receivers and indicates with a tone and a red LED that an alarm
has occurred. In the space next to each red LED, you can write a brief description
identifying the zone or device that issued the alarm. If your facility requires the
Staff Alert Panel to be visible, it must be located on a wall near the Nurses Station;
or it can be located elsewhere such as a security office, or a phone operator room.
For more information about Staff Alert Panel, see the Staff Alert Panel Installation
Guide (PN 0510-1008).