User's Manual

Chapter 5: Using System Reports
136 Series 7.0 Software (0510-1086-B) - User Guide
Facility Trends (Tracer Level 3)
Joint Commission reports are generated in three tiers, Trend, Trend Reason and Trend Reason Detail reports.
Alarms that occur when Enforce Joint Commission is “off” only populates the Trend report. Once Enforce
Joint Commission is activated, the Trend Reason and Trend Reason Detail reports will begin to populate.
Since alarms may have been generated before Enforce Joint Commission was activated, the numbers
between the Trend report and the Trend Reason and Trend Reason Detail reports may not match.
Joint Commission Alarm Trend Report
The Joint Commission Alarm Trend Report lists the different events that have occurred in the system in six-
month segments and then provides a bar graph to track the events. By clicking the Print icon, you can print
this report.
FIGURE 5.4: Joint Commission Alarm Trend Report
NOTE: If the Event cause is “Other,” go to the All Other Reasons Report and review the memo
field for more information. You can also select the “Other” hyper-link from any Joint
Commission Details Report.