User's Manual

Table Of Contents

Series 7.0 Software (0510-1086-B) - User Guide 123

Event Types

Escort Expired

This alarm occurs when the selected amount of time required for an asset to be escorted has expired and the

transmitter, in the Escort mode, has not been moved from or has not yet been returned to the protected area.

To respond to an Escort Expired Alarm

1. Determine the location of the asset.

2. From the Client computer, click anywhere in the Escort Expired Alarm Message Box to access the

Event Information window.

3. Select one of the following event causes:

• Te s t—the system was being tested.

• Other—opens a Clear Reason window, user must enter the cause in this window.

You cannot clear an event until you select the appropriate cause for the event.

4. If the asset has not yet been moved, perform the Escort function again.

5. If the asset has been escorted and is being returned to the monitored area:

a. Bring the patient back through the door; a Door Alarm will occur.

b. Follow the procedures for handling a Door Alarm (refer to “Door Alarm” on page 98).

c. Select Escort problem for the cause. of the Door Alarm.

Escort Completed

This alarm occurs when the Escort for an asset is completed. This dialog box only appears if the software has

been configured to confirm the escort. The Confirm Escort is configured in the Configuration, Global

Settings menu (refer to the Series 7.0 Software Administrator Guide).

Transfer to Expire

This alarm occurs when the time allowed for an asset to be transferred will expire in 15-minutes (if the

allotted time was configured for greater than 15-minutes) and the alarming band transmitter, in the Transfer

mode, has not been moved from one protected area to another.

To respond to a Transfer to Expire

1. Determine the location of the asset.

2. If the asset is secure and will not be transferred to a protected area soon, clear the Transfer to Expire

alarm and reset the duration of the Transfer function.

3. If the asset has not yet been moved, clear the Transfer to Expire alarm and cancel the Transfer.