User's Manual

Series 7.0 Software (0510-1086-B) - User Guide 115
Event Types
Pre-Enroll Expired
This alarm occurs when the amount of time allowed for a Pre-Enroll transmitter to be banded has expired and
the Pre-Enroll has not completed properly.
To respond to a Discharge Expired Alarm
1. If the transmitter has not yet been banded, click anywhere in the Pre-Enroll Expired Alarm
Message Box to access the Event Information window.
2. Select Clear.
3. Perform the Pre-Enroll function again.
Discharge Expired
This alarm occurs when the amount of time allowed for an alarming band transmitter to be removed has
expired and the discharge has not been completed properly.
To respond to a Discharge Expired Alarm
1. If the transmitter has not yet been removed, click anywhere in the Discharge Expired Alarm
Message Box to access the Event Information window.
2. Select one of the following event causes:
• Patient Delayed—the patient is delayed and requires more time for the discharge.
• Attendant Delayed—the attendant was delayed in discharging the patient.
• Te s t—the system was being tested.
• Other—opens a Clear Reason window, user must enter the cause in this window.
You cannot clear an event until you select the appropriate cause for the event. If the patient is not
being discharged, the patient’s information is still in the database and the software continues to
assist staff in monitoring the patient.
3. Perform the Discharge function again.
Discharge Completed
This alarm occurs when the Discharge for a patient is completed. This dialog box only appears if the software
has been configured to confirm the discharge.The Confirm Discharge is configured in the Configuration,
Global Settings menu (refer to the Series 7.0 Software Administrator Guide).