User's Manual

Chapter 4: Handling Events
114 Series 7.0 Software (0510-1086-B) - User Guide
White Alarms
The following sections provide detailed information about White Alarms, responding to alarming events, and
the way the events should be cleared. White Alarms are low priority alarms. They are displayed in the Alarm
Message Box and the Event List sequentially as they occur. White Alarms are displayed below Yellow
Alarms.
Auto-Enroll
The Auto-Enroll feature automatically enrolls alarming band transmitters into the system without requiring a
manual admit. Once the transmitter is auto-enrolled, the system monitors the transmitter for Door, Cut Band,
or No Signal alarms.
To respond to an Auto-Enroll
1. From the Client computer (s), click anywhere in the Auto-Enroll Alarm Message Box to access the
Event Information window.
2. Select one of the followings:
• Clear—clears the Auto-Enroll from the Alarm Message Box and the Event List.
• Admit—opens the Admit Information window for that transmitter so that you can assign the
transmitter to a patient.
• Close—closes the Admit Information window without clearing the Auto-Enroll.
To permanently silence an Auto-Enroll
1. From the Client computer(s), click anywhere in the Auto-Enroll
Alarm Message Box to access the Event Information window.
2. Click the Silence button. When an alarm is permanently
silenced, a silence icon appears in the Alarm Message box for
that alarm.
Admit Completed
This alarm occurs when the Admit function for a patient is completed. This dialog box only appears if the
software has been configured to confirm the Admit.The Confirm Admit is configured in the Configuration,
Global Settings menu (refer to the Series 7.0 Software Administrator Guide).