User's Manual

Chapter 3: Using the Software
94 Series 7.0 Software (0510-1086-B) - User Guide
5. Select Send Cisco Messages.
Send Manual Cisco Phone Message window opens.
FIGURE 3.27: Send Cisco Phone Message
6. From the Send Cisco Message to: drop-down, select the message group you wish to send a
manual page.
7. Type your message in the Enter the message to send: field.
8. Click Send to send your message.
9. Click Cancel if you do not wish to send the message.
10. Follow the same steps to send Pager, Text, Email, or Care Manager messages.
NOTE: The text messaging functionality is dependant on the performance constraints of
your network. This means that text messages may take a long time to get through or they
may appear in a different order then they were sent. Text message notifications should
not be used as the primary form of notification.
NOTES:
• The Cisco phone system will not issue a busy signal when the phone is in use. If there is
no answer on the other end, it may mean that the patient is on the phone.
• The following alarm events and information cannot be messaged to Cisco phones.
a. Asset Alarms
b. Scheduled Events
c. Any event that initially triggers a White Alarms (i.e. Auto-enroll, Discharge expired)