Brochure
Performance Products
Mainstream Engineering • 800.866.3550 • www.qwik.compage 4
(QT2800, QT2810, QT2812, QT2910, QT2912)
QwikLug®
Compressor Terminal Repair Kit w/3 Terminal Repair Lugs
Patented QwikLug easily attaches to damaged or corroded spade connectors, quickly and easily
solving the problem of a compressor with pitted or severely corroded spade terminals.
(QT2000)
QwikCheck®
2-Second Refrigerant Acid Test
Fast, accurate, and easy to use, QwikCheck is ideal for preventive maintenance checks and
for verifying proper acid clean up. The QwikCheck indicator paper is golden yellow before
testing and will turn pink or red upon being exposed to as little as 1 part per million (PPM) of
organic acid.
Perform an acid test in about 2 seconds on operating systems... just insert QwikCheck’s valve core
depressor into the center of the suction side of the vapor service valve while the system is operating.
(QT2501)
QwikShot®
Refrigerant and Oil Treatment (Removes water and acid!)
½oz Bottle that Works with All Refrigerants and Oils
QwikShot Refrigerant and Oil Treatment was developed to solve the problem of treating acid
without leaving disruptive residues. Neutralization acid treatment must leave a residue of some
kind and residues can cause problems. Instead of neutralizing, QwikShot quickly ushes any
harmful acids and moisture into the lter-drier of an operating system.
(QT6000)
QwikSEER+®
Provides Variable Airow for PSC Blower Motors
Enhances System Eciency & Humidity Removal
QwikSEER+ is the aordable solution to enhancing A/C or heat pump systems, Typically Saving
homeowners 10% or more on annual operating costs! Plus QwikSEER+ can
improve the humidity removal rate up to 156%!!!
(QT6001)
QwikSEER+® Accessory Humidity Sensor
Provides Improved Humidity Removal when used with QwikSEER+ or QwikSwap
MKTG000218_REV-Q / 100011301
` Enables tight clean connections to damaged or
corroded terminals
` Fits all standard compressor terminals
` Easily tightens from the front
` Optional set screws for tight installations
` Provides a durable brass connection,
tested for more than 100,000 compressor starts
` Fully insulated brass connector
` 1-½oz Bottle Treats up to a 6 Ton System
` Tests to ARI-700 limit of 1 PPM
` Removes up to 26 Drops of Moisture!
` Available with 10 AWG or 12 AWG leads
in 2’ or 4’ lengths
` 2’ leads have been pre-stripped at the wire
connection end
` 4’ leads have fully insulated female
connectors for connection directly
to the contactor
U.S Patent #7,232,775
U.S Patents #9,816,740 and #10,495,362
U.S Patent #9,207,001
QT6000
QT6001
` Meets EPA Venting Rules!