Brochure

Humidity Removal
Increased Humidity Removal Rate*
82°F
97°F 112°F
% Faster Humidity Removal with QwikSEER+ WattSaver™
2
112
°F
°F
Up to
566%
Faster
Humidity
Removal
with
QwikSeer+
WattSaver™
U
56
F
Hu
Re
w
Qw
i
Wa
t
82°
82°
F
F
9°
97°
F
F
157%
Faster
52%
Faster
*Based on Independent Laboratory Testing at Intertek (Plano,
Texas) of a 14 SEER system.
For complete test results, go to www.qwik.com.
Enhance your system’s e ciency
at a fraction of the cost
Designed to work with your present air conditioning or heat pump system, QwikSEER+
WattSaver™ has been demonstrated to provide EER improvements of 7-13%* along
with improved humidity removal.
 Saves money
 Uses less energy
QwikSEER+ WattSaver’s™ plug & play design is fully compatible with your existing
system. No need to change or purchase additional components. QwikSEER+ WattSaver™
handles everything automatically!
Indoor air quality (IAQ) is a vital factor in
maintaining a healthy life. By reducing
the humidity in a home, mold growth is
avoided.
According to the EPA (http://www.epa.
gov/mold/preventionandcontrol.html),
to prevent mold, relative humidity should
be maintained below 60%.
QwikSEER+ WattSaver™ has been
shown to improve humidity removal
rates by up to 566%. This increased
moisture removal can signi cantly
improve indoor comfort while also
inhibiting the formation of mold, thus
improving IAQ.
QwikSEER+ WattSaver’s™ optional
humidity control is engineered to
optimize the system for fastest humidity
removal during high-humidity situations.
With
QwikSEER+
WattSaver™
14 SEER UNIT EFFICIENCY TEST RESULTS
Without
QwikSEER+
WattSaver™
*Typically
7-13%
Increased
Efficiency
with
QwikSeer+
WattSaver™
System
Efficiency
without
QwikSeer+
WattSaver™
 Increases comfort
 Improves humidity removal
Increase Humidity Removal Rate up to 566%
Additional Bene ts
 Added Blower Motor Protection: QwikSEER+ WattSaver’s™ patented
design incorporates high-voltage electrical protection from voltage spikes often
created by severe thunderstorms. This feature could eliminate the need for motor
service or replacement.
 1 Year Limited Warranty:
Mainstream Engineering Corporation warrants
this product against failure due to defect or workmanship under normal use and
maintenance.
QwikSEER+ WattSaver™ is
a revolutionary electronic
control that works with
existing system hardware
to automatically adjust the
air ow of your air conditioner
or heat pump to maximize
performance, increase
humidity removal, and save
energy.
Here’s How…
QwikSEER
+
WattSaver
™
*Independent Laboratory Testing at Intertek (Plano, Texas) following ANSI/ASHRAE 37 test protocol and using a residential 14 SEER air handler and condensing unit
(80°F indoor, 97°F outdoor temperatures) resulted in an EER improvement of 7.4%. Using the same condensing unit and temperature conditions with a residential
furnace unit resulted in an EER improvement of 10.5%. On cooler days, (82°F outdoor temperature) the EER improvements for air conditioning and furnace units
increased to 10.9% and 12.9% respectively. For complete test results, go to www.qwik.com.