Product Overview

QwikLug
TM
QwikLug
TM
Compressor Terminal Repair Kits
Mainstream’s patented product, QwikLug
™
, easily attaches to
damaged or corroded spade connectors. QwikLug
™
comes
with color-coded leads to connect to existing wiring. The
outer connector housing is a nylon insulator, eliminating the
potential for shorting. It’s that easy!
 Replaces damaged or corroded spade terminals
 Fits all standard compressor terminals
 Tightens from the front with a screwdriver
 Provides a durable brass connection – tested for more
than 100,000 compressor starts
 Fully insulated brass connector
 Available with 10 AWG or 12 AWG leads in 2’ or 4’ lengths
 2’ leads have been pre-stripped at the wire connection
end
 4’ leads have fully insulated female connectors for
connection directly to the contactor
 Fully insulated 4’ leads with female connectors to link
directly to the contactor
Directions for use:
1. Clean the damaged or corroded terminals.
2. Push the
QwikLug
™
connector onto the terminal.
3. Tighten from the front with a Phillips screwdriver.
For more details or information about QwikLug
TM
, visit www.qwik.com
QwikLug
TM
Compressor Terminal Repair Kits Ordering Information
Mainstream Engineering Corporation
1-800-866-3550
www.qwik.com
MKTG000021 / 2000805
PROUDLY MADE
IN THE U.S.A.
QwikProducts™ and QwikLug™ are trademarks of Mainstream Engineering Corporation.
Rockledge, Florida 32955, [phone]
U.S. Patents #6,048,233 & #6,565,393 All QwikProducts™ are made in the USA
Finally... a Quick & Simple Method
to Repair Compressor Terminals!
 QT2810 - Package of 3 QwikLugs™ with 10 AWG 2’ Leads
 QT2812 - Package of 3 QwikLugs™ with 12 AWG 2’ Leads
 QT2910 - Package of 3 QwikLugs™ with 10 AWG 4’ Leads
 QT2912 - Packages of 3 QwikLugs™ with 12 AWG 4’ Leads