Specification Sheet

QwikLug
®
QwikLug Compressor Terminal Repair Kits
Mainstream’s patented product, QwikLug, easily attaches
to damaged or corroded terminals.
QwikLug has color-
coded leads to connect to existing wiring. The outer
connector housing is a nylon insulator, eliminating the
potential for shorting. It’s that easy!
` Enables tight clean connections to damaged or corroded terminals
` Fits all standard compressor terminals
` Easily tightens from the front
` Optional set screws for tight installations
` Provides a durable brass connection,
tested for more than 100,000 compressor starts
` Fully insulated brass connector
` Available with 10 AWG or 12 AWG leads in 2’ or 4’ lengths
` 2’ leads have been pre-stripped at the wire connection end
` 4’ leads have fully insulated female connectors for connection
directly to the contactor
Directions for use:
1. Clean the damaged
or corroded terminals.
2. Push the QwikLug
connector
onto the terminal.
3. Tighten from the front.
For more details or information about QwikLug, visit www.qwik.com
QwikLug Compressor Terminal Repair Kits Ordering Information
Mainstream Engineering Corporation
1-800-866-3550
www.qwik.com
MKTG000021_REV-F-3 / 1000108EN05
MADE IN THE U.S.A.
QwikProducts® and QwikLug® are registered trademarks of Mainstream Engineering Corporation.
Rockledge, Florida 32955, [phone]
U.S. Patents #6,048,233 & #6,565,393 All QwikProducts®are made in the USA
Finally... a Quick & Simple Method to Repair Compressor Terminals!
y QT2800 - Package of 3 QwikLugs with 10 AWG 2’ Leads
QT2810 - Package of 3 QwikLugs with 10 AWG 2’ Leads
y QT2812 - Package of 3 QwikLugs with 12 AWG 2’ Leads
y QT2910 - Package of 3 QwikLugs with 10 AWG 4’ Leads
y QT2912 - Packages of 3 QwikLugs with 12 AWG 4’ Leads
Q wikLug Depth-Set Instructions
Caution! Slide QwikLug over metal NOT over insulator.
YES NO
Optional Set Screws
When installing QwikLug where space is restricted,
simply replace phillips head screws
with optional set screws.
QwikLug Depth-Set Instructions
Caution! Slide QwikLug over metal NOT over insulator.
YES
NO
Optional Set Screws
When installing QwikLug where space is restricted,
simply replace phillips head screws
with optional set screws.
QwikLug Depth-Set Instructions
Caution! Slide QwikLug over metal NOT over insulator.
YES
NO
Optional Set Screws
When installing QwikLug where space is restricted,
simply replace phillips head screws
with optional set screws.
QwikLug
Depth-Set
Instructions
CAUTION!
Slide QwikLug
over metal.
NOT
over insulator.
Optional
Set Screws!