Product Overview

QwikCheck

Acid Test Kit

QwikCheck® is ideal for preventive maintenance checks

and for verifying proper acid clean up. The

QwikCheck®

indicator paper is golden yellow before testing and

will turn pink or red upon being exposed to as little as

1 part per million (PPM) of acid.

Perform a Qwik acid test on operating systems. Ideal

for preventative maintenance checks or for verifying

proper acid clean-up after a compressor burn-out /

change-out.

ff 2-Second Refrigeration Acid Test

ff Tests to ARI-700 limit of 1 PPM

ff Tests for Inorganic Acid

(including POE)

ff Meets EPA Venting Rules

Directions:

1. Insert the valve core depressor into the center of the suction side of the vapor service

valve while the system is operating.

2. Allow vapor to ow through the

QwikCheck® for 2-seconds. If the indicator paper does

not change color, hold for another 2-seconds. If the indicator paper still does not change

color, inorganic acid was not detected.

3. If the indicator paper changes color slightly, add

QwikShot® to remove the acid. If the

paper turns red, the acid level is very high. Change the oil and the lter-drier, and then

add

QwikShot®.

For more details or information about QwikCheck® visit www.qwik.com

QwikCheck® 2-Second Acid Test Kit - Part # QT2000

U.S. Patents #6,514,765 & #5,770,048

Mainstream Engineering Corporation®

1-800-866-3550

www.qwik.com

MKTG000037 / 2000801

QwikProducts™ is a trademark of Mainstream Engineering Corporation®. QwikCheck®, QwikShot® and

Mainstream Engineering Corporation® are registered trademarks of Mainstream Engineering Corporation,

Engineering Corporation

BEFORE

AFTER

PROUDLY MADE

IN THE U.S.A.

QT2000

QwikCheck