Overview of Primary Product

Mainstream Engineering Corporation
1-800-866-3550
www.qwik.com
MKTG000045_REV-B / 100010802-B
Qwik System Flush
®
Equipment Requirements
to ush an Air Conditioning or Refrigeration System
using Qwik System Flush® Aerosol.
The following equipment will be required
for each ushing operation:
1. Qwik System Flush®. As a general rule, one two pound aerosol
canister will clean up to a 10-ton system. The amount needed will
vary by size and level of contamination. See the chart below to
estimate what you’ll need to complete your task.
2. Qwik-SF® Access Valve, part number QT1105, or equivalent tool
with a pressure relief valve.
3. Refrigerant charging hose.
4. A are tting for access to section to be ushed - either a are
tting that you can braze onto the pipe, a Line Set Tool (QT1110), or
our Squeeze-Type QwikNozzle™ (QT1106 - available separately as
pictured or included with QT1150).
5. An empty sealable waste container to capture waste as it
exits the HVAC system. Dispose of waste contents/container in
accordance with local/regional/national regulations.
6. Compressed nitrogen.
7. Safety glasses.
8. Protective gloves.
Qwik-SF® Can Access Valve
with Built-In Pressure Relief Valve
P/N QT1105
Qwik-SF® Line Set Tool
P/N QT1110
Squeeze-Type QwikNozzle™
Lineset Flush Tool
P/N QT1106
Qwik-SF® Starter Kit
P/N QT1150
Qwik-SF® 1lb.
P/N QT1130
Qwik-SF® 2lb.
P/N QT1100
Charging Hose
Part Number
Description
Qwik System Flush®
QT1100 2 lb Aerosol can for up to 10 ton systems
QT1130 1 lb Aerosol can for up to 5 ton systems
QT1150 2 - 1 lb Aerosol cans for up to 10 ton systems
N
2
WASTE