Operation Manual

66
Maintenance
Maintenance Check
The rst maintenance visit is recommended aer 250
km (155 miles) or aer 3 months from purchasing.
Addional service would be advised when necessary.
For example before the cycling season starts or before a
long cycling tour.
• Check the wheels and res (Bends in the wheels,
spoke tension, re pressure, re grip)
• Tighten all mounng parts / bolts and nuts if
necessary
• Check the brakes for wear and tear, adjust the
oil pressure when needed and check the brake
funcon
• Check the headset for slack, check the handlebar
stem and adjust when necessary
• Clean the chain, put it to the right tension, and
lubricate with teon spray
• Electrical system: Fully charge the baery, clean
the moon sensor with lukewarm water and a
sponge, use contact spray for any contacs, grease
the baery contacts and baery rails with acid-free
vaseline and check the complete drive train for any
malfuncon
• Derailleur: Make sure all the gears run smoothly,
adjust when needed