Operation Manual

58
General parts of the electric bicycle
Gears
Shimano Nexus 7 with 7 gears
The Shimano Nexus 7 is a hub gear with 7 gears.
Shiing is easily done by turning the gripshier at the
grip on the right side. You can always shi, even in
stand. In the display of the gripshier you can see the
current gear.
Fine tuning Shimano Nexus 7
To ne-tune the hub gears you can put it in 4th gear.
Turn the pedals backwards a few mes. Check whether
the 2 lines at the boom of the rear cassee are
aligned. Adjust the cable tension by turning the cable
adjustmentscrew aached to the gripshier unll the
desired result is achieved.
* Aenon! Decrease the force on the pedals while
shiing for smooth shiing and a prolonged lifeme of
the hub. The gear shi sensor controls that the motor
will provide no power at the moment that you are
shiing.
NuVinci N360 with uent gears (360%)
The NuVinci N360 is a maintance free hub gear that
shis uently from the lowest to the highest gear, with
a large gear range of 360%. Shiing will be smooth even
under heavy load.
Controlling it is easily done by turning the gripshier
at the grip on the rightside. You can always shi, even
in standsll. (However, pedalling during shiing makes
it a bit lighter, and you can only shi between the
enre gear range when pedalling). In the display of the
gripshier you can see the current gear rao.
* Aenon! Decrease the force on the pedals while
shiing for smooth shiing and a prolonged lifeme of
the hub.
General parts of the electric bicycle