Operation Manual

54
Adjusng the bicycle
Adjusng the bicycle
Saddle
Desired seat height
Seat height refers to the distance between the saddle
and pedal in the lower posion. The seat height is
properly adjusted if the knee bents just a lile when
you stand with your foot on the pedal (in the lower
posion). Please do not hesitate to ask your dealer for
advice!
* Aenon! If you can put your feet at on the ground,
your saddle is too low.
Seat height adjustment
The height of the seat can be adjusted by loosening the
Allen bolt in the seat clamp with an Allen key.
* Aenon! The safety marks should never be visible
when the seat is adjusted in height.
Saddle posion adjustment
At the saddle connecon you can lt the seat and
adjust it to the front as well as to the back.
To adjust the saddle at the saddle clamp turn the bolt(s)
on the underside (or the sides) of the saddle clamp to
loosen it.
*Aenon! Do not forget to ghten the bolts and
make sure that your seat is rmly reaached aer
adjustments!
Seatpost suspension adjustment
With a seatpost with suspension you can also adjust
the suspension with an Allen bolt at the boom of the
seatpost tube. This bolt is accessible when the seat post
is completely taken out.