Operation Manual

NEDERLANDSDEUTSCH ENGLISH

Display & Controls: Rearmotor models

Failure codes

It is possible that failures occur. If this happens, go to

the dealer as soon as possible so repairs can be carried

out quickly. The following codes can be displayed on

the display:

Code 01: Problem with 3-phase control from the controller of motor

Code 02: Problem with throle connecon (not in use)

Code 03: Motorcable 3-phase wiring loose or defecve

Code 04: Motorcable Hall Sensor signal malfuncon (malfuncon in motor or motorcable)

Code 05: Malfuncon in brake sensor(signal)

Code 06: Baery voltage too low

Code 07: Motorcable is connected incorrectly

Code 08: Malfuncon in display signal

Code 09: Malfuncon in pedalsensor(signal)

Code 10: Malfuncon in display signal