Operation Manual
82
General components of the electric bicycle
Derailleur gears
The Performance RD9.2 and RD9.2s are equipped with
a Shimano Deore 9 speed derailleur. The Performance
RD10 and MD10 model have a 10 speed Shimano SLX
derailleur.
All Performance models with derailleur gears are
controlled by a Shimano Rapidre shier. These shiers
can be manually controlled with the two levers next
to the right grip. The lowest one (controlled with the
thumb) shis 1 gear down/lighter with a small push or
2 gears down/lighter with a big push. The upper shier
(controlled with your index nger) shis 1 gear up/
heavier with every push. See the image on the next
page.
It is important to always keep cycling when shiing
gears, but don’t use force on the pedals while shiing.
Never shi gears when in a standsll. The display of the
shier shows which gear you are in.
Rapidre shier control of the derailleur gears
Fine tuning derailleur gears
To avoid unnecessary wear and noise from the chain,
you can make sure that the derailleur wheel is in a
straight line with the cassee wheel. The chain should
also run in a straight line. It is possible to ne-tune this
at the rear derailleur or with the adjustment screw at
the shier.