Operation Manual
79
NEDERLANDSENGLISHDEUTSCH
!
Adjusng the bicycle
The Performance MN380 has been equipped with a
TranzX steer stem, which can be adjusted in height and
angle by loosening just one bolt. This bolt is located at
the front top side of the stem, see picture on the right.
Aer loosening the bolt, adjust the handlebar and steer
to the desired posion. If you are sased, ghten the
bolt again with a torque of 10-12Nm.
Do not forget to ghten the bolts aer
adjustments and make sure that your
handlebars are aached rmly again.
Adjusng the grips
On all QWIC bicycles you can easily adjust the angle
of the grips. In this way you’ll always have the most
comfortable grip with a well-divided pressure.
By loosening the Allen screws on both sides on the edge
of the grip (beneath the round holes) with an Allen key,
you can adjust the corner of the handle. Do not forget
to ghten them again when ready.