Operation Manual
64
i
!
Baery & Charging
Baery & Charging
Range
The total distance that you can travel per trip with a
single charge of baery is called the range. The range
depends on the capacity of the baery and the energy
consumpon of the motor.
Baery capacity
The amount of energy in a baery is expressed in Wa-
hours (Wh). The number of Wa-hours is calculated by
mulplying the number of Ampère-hours (Ah) mes the
nominal Voltage (36V). The higher the amount of Wa-
hours, the higher the range!
The QWIC Performance models come with baeries
with a 525Wh or 735Wh capacity. The capacity of the
baery is marked on the boom of the baery.
Baeries drain energy slowly, even if the
bicycle is not used. If the baery is connected
to the bike it will run out of power faster than if
it is taken out and stored inside.
Range
The range of your e-bike depends on the choice of
baery capacity, power of the motor and chosen
power level. The esmated range that you can expect is
displayed in below table:
Note that under dierent condions the
range can dier strongly. Our tests have been
carried out on at terrain, at temperatures of
approximately 20 degrees Cengrade, at an
average speed of 20 km/h and an approximate
total weight of 75kg.
RD10 LEVEL 1 LEVEL 4
735 Wh 75 - 180 ± 115 40 - 80
525 Wh 55 - 145 ± 90 25 - 65
AVERAGE
MN380 & MD10 ECO SPORT
735 Wh 200 - 230 ± 100 60 - 85
525 Wh 150 - 200 ± 80 45 - 65
AVERAGE
RD10 Speed LEVEL 1 LEVEL 6
735 Wh 35 - 75 ± 55 25 - 35
525 Wh 25 - 60 ± 45 18 - 25
AVERAGE